TV JONES THUNDERBLADE UNIV. MT CHROME NECK

TV JONES THUNDERBLADE UNIV. MT CHROME NECK

Disponibile

157,00 € Tasse incluse

Riferimento TVTBUMCN

Descrizione
Dettagli del prodotto

Clear, Bold & Smooth

Similar to the Thunder’Tron, but with steel blades instead of pole screws. The blades provide a larger magnetized surface area, producing greater inductance. The resulting tone retains the Thunder’Tron clarity, yet is full, bold and smooth. A great choice for basses with wider string spacing.

Finitura: CHROME
UNIVERSAL Mount

Bridge: Blades are milled with a radius for superior string-to-string balance and output.
DC Resistance: 4.8K Inductance: 2.79H

Neck: Made with flat blades to keep the tone clear and warm, not over-powering.
DC Resistance: 4.0K Inductance: 1.74H

DEMO

Special Considerations

Filter'Tron Replacement: The Universal Mount is a direct drop-in replacement for Vintage Filter'trons, HS Filter'trons, Fideli'trons, Mega'trons, Full-trons and any other standard sized 'Trons.

Blacktop Filter'Tron Replacement: You will need the Universal Mount and one Dual Screw Mount Adapter per pickup to mount into the stock rings.

Broad'Tron Replacement: You will need the Universal Mount along with a new EM2 Ring or EM5 Ring.

Gretsch-Bucker Replacement: You will need the Universal Mount along with a new EM2 Ring or EM5 Ring.

Post-2012 Electromatics: You will need the Universal Mount with one Dual Screw Mount Adapter per pickup. This is necessary to mount the pickup into your stock ring.

Streamliners: These guitars are made with "Gibson-style" rings instead of standard Gretsch rings. You will want to choose the Universal Mount with either our EM1 Ring, EM2 Ring, or EM5 Ring to replace the stock ring when installing a Universal Mount Pickup (this depends on which style you prefer). If you choose either the EM2 or EM5 Gretsch-style Rings you will also want a pack of Ring Risers (due to the neck angle).

Gretsch 5120/5122: You will need the Universal Mount along with an EM2 Ring or EM5 Ring and Ring Risers. Risers are recommended because the neck angle on these guitars tend to be high. You can find those in our Hardware section.

Gretsch 5420/5422 - early models: You will need the Universal Mount. If your guitar came stock with the large metal rings you will not be able to replace them with the smaller Gretsch rings because the footprint is too large. You will need one of our Dual Screw Mount Adapters for each pickup to attach the pickup to your stock ring.

Humbucker Replacement: To replace standard Humbuckers you will need the Universal Mount with one of our EM1 (Gibson-style), EM2 (Gretsch), EM5 (Gretsch), or EM4 (Fender-style) rings.