TV JONES POWERTRON-PLUS UNIV. MT GOLD BRIDGE

TV JONES POWERTRON-PLUS UNIV. MT GOLD BRIDGE

Disponibile

€158.00 Tax included

Reference TVPTPUMGB

Description
Product Details

NE Filter'Tron Mount - comes standard with short pole screws and compression rubber

The collaboration between TV Jones and Billy Gibbons resulted in the development of the Power’Tron Plus. The desire was to create a Filter’Tron-sized pickup with a stronger midrange presence and higher output, while still retaining the famous sparkle and bass-note clarity of our TV Classic!

Bridge Position Only: The Power'Tron Plus bridge model was designed with more magnet wire to resemble a hotter Gibson PAF Humbucker (in the 8.5k DCR range) while still retaining the core Filter'Tron™ characteristics. It has more output and natural full midrange. The lows are tighter and more defined than a traditional Humbucker.
DC Resistance: 8.5K Inductance: 6.77H

TONE / Characteristic:

Increased midrange with tighter, more defined low-end. More punch, slightly darker with a hint of sparkle. Works well if coil splitting is desired.

BEST FOR:

Heavier Rock
Rock
Rock n' Roll
Blues
Punk

Special Considerations

Filter'Tron Replacement: The Universal Mount is a direct drop-in replacement for Vintage Filter'trons, HS Filter'trons, Fideli'trons, Mega'trons, Full-trons and any other standard sized 'Trons.

Blacktop Filter'Tron Replacement: You will need the Universal Mount and one Dual Screw Mount Adapter per pickup to mount into the stock rings.

Broad'Tron Replacement: You will need the Universal Mount along with a new EM2 Ring or EM5 Ring.

Gretsch-Bucker Replacement: You will need the Universal Mount along with a new EM2 Ring or EM5 Ring.

Post-2012 Electromatics: You will need the Universal Mount with one Dual Screw Mount Adapter per pickup. This is necessary to mount the pickup into your stock ring.

Streamliners: These guitars are made with "Gibson-style" rings instead of standard Gretsch rings. You will want to choose the Universal Mount with either our EM1 Ring, EM2 Ring, or EM5 Ring to replace the stock ring when installing a Universal Mount Pickup (this depends on which style you prefer). If you choose either the EM2 or EM5 Gretsch-style Rings you will also want a pack of Ring Risers (due to the neck angle).

Gretsch 5120/5122: You will need the Universal Mount along with an EM2 Ring or EM5 Ring and Ring Risers. Risers are recommended because the neck angle on these guitars tend to be high. You can find those in our Hardware section.

Gretsch 5420/5422 - early models: You will need the Universal Mount. If your guitar came stock with the large metal rings you will not be able to replace them with the smaller Gretsch rings because the footprint is too large. You will need one of our Dual Screw Mount Adapters for each pickup to attach the pickup to your stock ring.

Humbucker Replacement: To replace standard Humbuckers you will need the Universal Mount with one of our EM1 (Gibson-style), EM2 (Gretsch), EM5 (Gretsch), or EM4 (Fender-style) rings.